The Goot POT-400C is especially suitable for preparatory soldering of relatively large parts, solder-dipping of large terminals, urethane wires, connectors, and big wire leads. The POT-400C is a Cast Iron solder bath and is recommended for lead free solder.
Goot POT-400C Lead Free Large Solder Pot sold by Howard Electronics
- Perfect Temperature:
PID temperature control minimizes deviation of solder or setting temperature.
- Dual Display:
Dual digital temperature display shows set temperature and measured temperature values at the same time.
- Extremely Accurate:
Extremely accurate setting value and measured value at very minimal tolerance as {(display value x 1.25%)+1C}
- Cast Iron Solder Bath:
Recommended for lead free solder.
- Preparatory Soldering: (Patent Pending)
Suitable for preparatory soldering of relatively large parts, solder-dipping of large terminals, urethane wires, connectors, and big lead wires.
- Warning Lamp:
Warning lamp to detect any deviance from set temperature range.
- Separated structure:
Separated structure of solder bath and heater allow simple replacement of each part.
Model | POT-400C | |
---|---|---|
Voltage | 220-240V AC 50/60Hz | |
Power Consumption | 4kW | |
Max. Temp. | 400°C | |
Set Accuracy | ±{(1.25% of display temperature)+1°C} | |
Heater | Sheath Heater | |
Control System | PID Control | |
Power Cord Length | 3m | |
Solder Bath Material | Cast Iron | |
Max. Solder Volume | 50kg | |
Dimensions | Bath Unit | 602(W) × 165(H) × 427(D) mm |
Control Unit | 175(W) × 122(H) × 260(D) mm | |
Solder Bath | 400(W) × 60(H) × 300(D) mm | |
Weight | 43kg |
Purchase a Goot POT-400C Lead Free Large Solder Pot Today.
Howard Electronics offer you the customer the best Vendor selection of Soldering and Desoldering tools, SMD Rework, Heat Guns, Microscopes, and Specialty tools you could ask for. Our vendors are Atten, Auburn Technology, Chip Quik, Den-On Instruments, EDSYN, Goot, Hei Scope, JBC Tools, Jensen Global, Jovy, Mag Eyes, Master Appliance, Midwest Devices, MG Chemicals, Pana Vise, Qualitek, Steinel, Scienscope, Virtual Industries, Weller, and Xytronics. Please select the best vendor for the tools that you require.