Features and Benefits
- Dual controls for hot gas and tip temperatures to produce even heating of the board
- Micro adjustable and easy to read air flow indicator
- Runs on shop air or nitrogen 20 - 80 psi
- Use for site preparation and reinstallation of QFP's
- Recommended and utilized by major manufacturers and subcontractors for site preparation in high volume BGA programs
- Nitrogen can be used to reduce oxidation and bridging
Specifications
| Power Requirements | 120V, 60Hz |
| Power Rating | 39W - 330W |
| Heater Rating | 24V, 45W and 24V, 70W |
| Temperature Range | 400°F-800°F/205°C-427°C |
| Temperature Regulation | ±6°F/±3°C |
| Tip to Ground Voltage Leakage/Resistance | <2mV/<2 ohms |
| Overall Dimension | 5.8"W x 10"H x 8.8"D 147mm x 254mm x 224mm |
| Weight | |
| Power Supply | 6.2lbs/2.8kg |
| Desoldering Hand Tool | 13.5oz/383g |
Vendors
:
Howard Electronics offer you the customer the best Vendor selection of Soldering and Desoldering tools, SMD Rework, Heat Guns, Microscopes, and Specialty tools you could ask for. Our vendors are Atten, Auburn Technology, Chip Quik, Den-On Instruments, EDSYN, Goot, Hei Scope, JBC Tools, Jensen Global, Jovy, Mag Eyes, Master Appliance, Midwest Devices, MG Chemicals, Pana Vise, Qualitek, Steinel, Scienscope, Virtual Industries, Weller, and Xytronics. Please select the best vendor for the tools that you require.
Edsyn
